LED Tail Lamp Retrofit - 3 Series & X5



Circle BMW is pleased to offer the tasteful and modern LED tail lamp retrofit for X5 (E70) and 3 Series (E92/93) vehicles produced up to the Life Cycle Impulse (LCI) introduction.

One of the most recognizable visual enhancements to the LCI X5 and 3 Series, were the upgraded LED tail lamps. These tail lamps are now available to update the look of those pre-LCI cars. This upgrade does not utilize a retrofit kit, but rather the standard LCI service parts, in conjunction with necessary retrofit coding and an adapter harness (3 Series only). This retrofit includes the M3 and X5M models.

NOTE: Similar aftermarket solutions may not function properly as the vehicles would not be coded to be compatible with the lower power requirement of LED’s. This could lead to “Bulb Check” warning lights, and flickering of the tail lamps on startup.

Availability:

ModelFromToPlace order
E70 (X5)Start of Production 3/2010Order Now
E92 (3 Series Coupe)3/20072/2010Order Now
E93 (3 Series Convertible) 3/20072/2010Order Now






Note: Turn signal illumination for US vehicles is Red

Product Highlights: Parts Information:

E70 (X5) including X5M       Order Now
DescriptionPart Number
Tail Lamp, Outer Left63 21 7 227 791
Tail Lamp, Outer Right63 21 7 227 792
Tail Lamp, Tailgate Left63 21 7 227 793
Tail Lamp, Tailgate Right63 21 7 227 794


E92 (3 Series Coupe) including M3       Order Now
DescriptionPart Number
Tail Lamp, Outer Left63 21 7 251 959
Tail Lamp, Outer Right63 21 7 251 960
Tail Lamp, Tailgate Left63 21 7 252 779
Tail Lamp, Tailgate Right63 21 7 252 780
Wiring harness adapter61 12 2 181 307
Footwell Module 3 (3/07 - 09/09)*61 35 9 241 008


E93 (3 Series Convertible) including M3       Order Now
DescriptionPart Number
Tail Lamp, Outer Left63 21 7 252 093
Tail Lamp, Outer Right63 21 7 252 094
Tail Lamp, Tailgate Left63 21 7 252 783
Tail Lamp, Tailgate Right63 21 7 252 784
Wiring harness adapter61 12 2 181 311
Footwell Module 3 (3/07 - 09/09)*61 35 9 241 008


* For E92/E93 3 Series vehicles produced from 3/2007 – 9/2009, the Footwell Module must be replaced for proper functionality. If the FRM has previously been replaced with an FRM3, it does not need to be replaced.